How to Sync Wii Remote: Here's the Best Solution Ever

How to Sync Wii Remote: Here's the Best Solution Ever
Flickr - Photo by ThatDudewithACamera
SHARE - Many people who own a Nintendo Wii and purchased another controller (remote) for their console probably have certain issues while setting up the new controller. The new remote just won't associate through Bluetooth. Then, it cannot be utilized with your Wii.

If you own a Nintendo Wii and you have a problem in setting up your new remote, you are in the right place. Here, Tripboba has all the solutions ready for you to follow. To assist your control set up, here are the steps of how to sync Wii remote you can do. Let’s get started!

How to Sync a Wii Remote

Flickr - Photo by rekhoon

Before you are going to attempt the solutions of how to sync Wii remote, make sure the sensor bar is centered either on top or under your TV gadget. Also, your good ways from the TV gadget ought to be somewhere in the range of 3 and 10 feet.

Make sure no other infrared light sources are interfering with the sensor bar. Besides, you should remove radio frequencies that might be interfering with the remote and console. It will be a smart idea to turn off wireless accessories like keyboards, mouse, or wireless telephones.

Keep scrolling for a more complete guide!

1. Taking the Battery Cover Off

Flickr - Photo by cinefil

The first solution of how to sync Wii remote is by taking the battery cover off. Turn on your Wii and hold up till the console itself is ready. Now, remove the battery off of the new controller. Right after that, press the adjust button on the new controller until all the blue LEDs on the front light up and blink.

The next step of how to sync Wii remote is to search for the adjust button under the SD card opening on the Wii console and then press it. When everything works, the blue LEDs on the controller will quit blinking when the controller at long last connected with your console.

If the problem is with your PC or a laptop/notebook, you should attempt to use Reimage Plus which can filter the repositories and replace corrupt as well as missing files. This works most of the time, where the issue is started because of the corruption of the system.

Just in case you still have issues connecting your controller, follow solution 2 below.

2. Try New Batteries

Flickr - Photo by J. Hendron

The second solution of how to sync Wii remote is trying new batteries. Sometimes, powerless batteries could prevent your controller from syncing effectively with your console.

How to sync Wii remote with this method? Well, you can buy new batteries for the new controller to replace the old batteries. After that, turn the power off and remove the power cord of the console immediately. Leave the string unplugged for in any event 30-60 seconds and afterward plug it in once more.

Next, hold up till the console completes the process of booting and is prepared. Then, attempt to synchronize your new controller again. Try the first solution and follow all the steps referenced.

There is a rumor going around related to how to sync Wii remote that you have to hold the synchronize button for a brief timeframe. Don't follow this step because it's just a rumor.

If you follow all the steps referenced, you have to get your new controller to sync effectively with your Wii console. If none of the Methods have solved the issue for you, we suggest using Reimage Repair Tool which can check the repositories to replace the corrupts and missing files.

This works most of the time, where the issue is begun because of a corruption system. Reimage will likewise optimize your system for the greatest performance.

What if the Wii Remote is already synced, but it's still not working?

Flickr - Photo by -supersam-

If you have a Wii remote that is synced but not working, you can apply these steps.
Step 1. Turn on the Wii console and afterward hold up until the "Health and Safety" screen shows up
Step 2. Do not press A.
Step 3. Now, open the SD Card space spread located on the front of the Wii console and under the disc drive. After that, press and hold the red SYNC button for 15 seconds. Doing this will erase all synced Wii Remotes from the console.
Step 4. Next, you need to resync the Wii Remote as referenced previously. Remove the battery cover and press the red 'SYNC' button. Next, press the SYNC button on the Wii console. You need to do this for all Wii Remotes you need to utilize.
Step 5. When the above advances don't work, you can remove the batteries of the Wii Remote. Leave them for a few minutes. Insert the batteries and sync the Wii Remote once more.


  1. 36 Questions That Lead to Love: With Tips How to Do It Properly!
  2. Best 75+ Who Knows Me Better Questions To Ask To Your Friends And Family!
  3. 110+ Patriotic Independence Day Greetings to Complete Your Independence Day Celebration
  4. 80+ Dad Jokes 2020 and Other Dad Jokes That Will Crack You Up
  5. 150+ Funny Questions to Ask on Instagram Story to Build A Deeper Relationship with Your Followers